Search results

Co2 needs to be at 12-16 % thats efficientcy of the motor.HC can be 0 a new cat can cover up alot of stuff. If your CO2 was zero the car wouldnt pass ,because the machine is smart enough to know that the hose isnt plugged into the car,your thinking of o2 thats usually around 0-1%thats how...

No it doesnt ,your problem is the choke is not staying on LONG enough.Its quite possible the choke spring is now weaker then when new ,and the butterfly opens sooner then when new ,and the high idle is linked to the butterfly ,no choke butterfly valve and no high idle. It needs to idle high...

Wheel bearings fall under BRAKES!!!!!! When you service the front brakes then you service the rotors thus packing the bearings ,and 75% now are sealed like the Professor's. As for Inkari's 5 spd.....yeah those are a bitch to refill to ,you will need a pump to pump the new oil in or a...

As long is it works!!!

XP for me! Ive been running for a few months now,Cant say Ive seen anything better.In addition Im a Power user / eye candy man ,so XP all the way.

This >>>>>>>>> http://www.ecsusa.com/K7S5A.cfm is also a Sweet baord ,it takes Athlon XP ,ahs both SDR and DDR and is $51 on pricewatch. They perform very well and are very stable ,not as many memory tweaks ,but it leaves you a RAM upgrade path and is CHEAP and RELIABLE. Have installed...

I second that ,they are very Tweakable ,for memory and overclocking.Best performing boards ,Ive actually had both the RAID and non RAID ,awesome boards.

You want to save yourself money in the LONG run??? Just do the prescribed maintance and you will....... Change oil every 3000 miles if you mostly in town driver ,every 5000 if you are a freeway driver,the in town drivers oil will get contaminated quicker because car doesn't get opened up...

Mine is the shuttle Kt266a board ,for like$80 it works great and is very stable ,and had no problems setting it up. Also flies!only I wish I had a 1/5 divider then could do 166. My harddrive gets corrupted bad at like 144 ,and with XP this is bad very bad.....reformat time.

heres me

The KT266a flies heres mine ,at like 137 fsb .........

soniclos: that to me sounds Impossible,due to the fact its an AIR valve as descibed and pictured above,the fuel pressure has absolutely nothing to do with the movement of the air/throttle valve. 1/4 tank problem,could have something to do with fuel pump and or lots of dirt in tank.

Its a bit complicated......... Is your DSL modem a Router aswell ,is it a Dsl router/modem ??? If it is not a router aswell then you CANNOT expect both pc and laptop to connect to web. Because it can only hook up to 1 item ,it cannot assign IP addresses. If it is a router/modem then...

I could care less ,I have nothing to hide ,What are they gonna do tell my wife I visited a pornosite?

A router has a Physical Firewall ,not a Software firewall,and you can configure the goodones especially for things like this. ZA give false reading ALOT. Personally I would not feel safe at all without a Physical Firewall. In addition sub7 backorafice ect...... you must have one running...

You know the deal ,you have to push it till it fails to boot winblows........ie 133x10 and 140x10. My guess around 1400 it will top out. The 1.2 cellys are hitting 1600 on aircool no prob.

might be monitor might be card?? only way is to flip flop from a good sys ect..... Take card and pop in good sys see if it works,attatch monitor to a good sys and see if it works ect...... saltedeggman ,that isnt UN-Common...the hardware most likey video card freezes up and a quick...

sexkitten ,I would like to overclock you a bit sexkitten.See what your really made of :whip:

Ive got your tool BABY!!! right here!:worm:

Well.... What do we have ,I believe that's a 2.2 or 2.5 either throttle body or port fuel injected motor? In any case you have a throttle cable ,and a throttle/air valve that opens and closes with pedal movement. My first response would be,either the cable is FREYED some where and is...