the lower ohm speakers will give you more power out of your amp.. *less resistance* BUT !!! the amp can (and will) overheat if it was not designed to handle the extra load\heat
The white goop fills the slot I made with the tape... pull the tape off and you have a small stripe left where the gap in the tape was..
The Brown goop (conductive paint) is for drawing a line accross the stripe and connecting the dots ..
Now take a pin or the tip of the xacto knife and dip it in the paint.... *Don't have any coffee before doing this*
draw a line with the paint, connecting the dots of the L1 bridges togather....
When dry *again 2 min* its ready to put in your system... this took all of 15 mins to complete...
Next was to fill in the pits with white out (just paint it on).
when dry *about 2 min* peel off the tape... what you have now is a clean "filled" serface to apply the conductive paint...
Happy me... FedEx came this morning with my new 1800+ (got it at newegg for 99 bucks shipped).
so the first thing I did was Unlock it :)
I have seen many "how to" articals on how to do this, so I figured I was ready to take the plunge..
I modified some of the steps, and am posting this to...
Ok.. after the OCZ ram which I ordered and then canceled, I made up my mind to get somthing good and Overclockable :)
So after much reading and comparing of DDR memory, I settled on this....
I ordered This tonight at Newegg for $83.00